ASME S Stamp
Power Boilers · Cert No. 55066
✓ Valid to June 2029
Quality / Code & certification dossier
Every stamp. Every standard. Every audit trail.
We hold four ASME stamps, ISO 9001 certification, and operate to API, TEMA, EJMA, and B31.x standards. This page lays out the dossier in full.
01 / ASME Authorizations
Two active stamps.
Maintained under joint review by ASME and our Authorized Inspection Agency.
Jun 2029
ASME Stamp · U
Section VIII Div. 1 — Pressure Vessels
Construction of unfired pressure vessels under ASME BPVC Section VIII, Division 1, including shop and field assembly.
- Effective
- [REPLACE — effective date]
- Next audit
- [REPLACE — next joint review]
Certificate available on request
Jun 2029
ASME Stamp · S
Section I — Power Boilers
Construction of power boilers and boiler external piping under ASME BPVC Section I, including drums, headers and waterwall panels.
- Effective
- [REPLACE — effective date]
- Next audit
- [REPLACE — next joint review]
Certificate available on request
02 / International Standards
Designed and built to the codes EPCs specify.
One certificate held (ISO 9001:2015). The remainder are design and construction standards we apply daily.
ISO 9001:2015
HeldQuality Management System
Certificate held. Annual surveillance by accredited body.
API 650 / 620
Welded Steel Tanks
Atmospheric and low-pressure storage tanks, field-erected and shop-built.
TEMA
Shell & Tube Exchangers
Tubular Exchanger Manufacturers Association — Classes R, C and B.
EJMA
Expansion Joints
Expansion Joint Manufacturers Association standards for metallic bellows.
ASME B31.1 / B31.3
Power & Process Piping
Power piping and process piping fabrication, including spool shops and skids.
ASME B16.20 / B16.21
Gaskets
Metallic and non-metallic gaskets for pipe flanges.
ASME B16.5
Pipe Flanges & Fittings
Pipe flanges and flanged fittings up to NPS 24.
AWS D1.1
Structural Welding
Structural welding code for carbon steel — platforms, skids and supports.
NACE MR0175 / MR0103
Sour Service
Materials selection and welding for H2S-bearing service in oil and gas.
ASTM / ASME II
Materials
Material specifications and allowables aligned with ASME Section II Parts A–D.
ASCE 7-16
Seismic & Loads
Minimum design loads — seismic, wind, snow — for buildings and other structures.
03 / Documentation
Certificates & Authorisations
Originals available on request. Click any certificate to inspect at full resolution.
All certifications current as of June 2026 — next ASME renewal June 2029
ASME U Stamp
Pressure Vessels · Cert No. 55067
✓ Valid to June 2029
ASME NB & R Stamps
National Board · R Cert No. 11519
ISO 9001:2015
LRQA · Cert No. 00029204 · UKAS Accredited
SMK3 + ISO 45001:2018
EQA IMS · Cert JSH-20-0277
MIGAS & EBTKE
Oil & Gas + Geothermal Registered Vendor
03 / Quality Management System
From RFQ to dispatch on one procedure.
Our ISO 9001 QMS aligns with the audited requirements of our ASME Authorized Inspection Agency. Every product moves through a documented procedure from RFQ to delivery.
Approval gate
Hold point
Deliverable
04 / Third-Party Inspection
The shop is set up for continuous TPI.
Hold-point and witness-point management is built into our ITP. Inspectors from any of the agencies below are accommodated as a standard part of the production schedule.
Lloyd's Register
TPI Agency
SGS
TPI Agency
Bureau Veritas
TPI Agency
TÜV Rheinland
TPI Agency
DNV
TPI Agency
Intertek
TPI Agency
05 / Non-Destructive Examination
In-house NDE across eight methods.
| NDE Method | Code | Capability | Personnel |
|---|---|---|---|
| Radiography (RT) | ASME V Art. 2 | Film + digital | ASNT Level II/III |
| Ultrasonic (UT) | ASME V Art. 4 | Conventional + PAUT + TOFD | ASNT Level II/III |
| Magnetic Particle (MT) | ASME V Art. 7 | Wet + dry | ASNT Level II |
| Liquid Penetrant (PT) | ASME V Art. 6 | Color + fluorescent | ASNT Level II |
| Hardness Testing | NACE MR0175 | Brinell + Vickers | ASNT Level II |
| Helium Leak | ASME V Art. 10 | Mass spectrometer | ASNT Level II |
| Positive Material ID | ASTM E1476 | XRF + OES | Qualified technician |
| Hydrostatic Test | ASME VIII / API 650 | Up to 100 barg | TPI witnessed |
06 / Welding Qualification
Procedures qualified across five material families.
We maintain over 200 qualified WPS / PQR combinations covering carbon steel, low-alloy steel, stainless steel, duplex, and nickel alloys.
200+
WPS count
180+
PQR count
120+
Welders qualified
6 mo
Re-qualification cadence
07 / Manufacturing Data Report
What every MDR contains.
A complete dossier ships with every vessel. Compiled in the client's template, cross-referenced to the weld map and signed by the TPI.
- 01Material Test Reports (EN 10204 3.1 / 3.2)
- 02Welding procedure specs (WPS) and procedure qualification records (PQR)
- 03Welder qualification register
- 04NDE reports (RT / UT / PAUT / MT / PT / PMI)
- 05PWHT cycle records and calibrated thermograph charts
- 06Hydrostatic test certificate
- 07Calibration certificates for all test instruments
- 08Nameplate photographs and stamping records
- 09ASME Code certificate (U-1 form) where applicable
- 10As-built drawings
08 / Credential Pack
Need the full credential pack as a PDF dossier?
We share the complete dossier — ASME certificates, ISO scope, sample MDR, WPS / PQR register and NDE qualifications — directly with vetted EPC and end-user counterparts.
FORM / DOSSIER-01